What is calibration?
Calibration is the process for Ensuring Effective Performance and Better Accuracy for Test and Measurement Instruments. The Calibration and Verification Service is the most effective way to ensure the instrument's efficiency, effectiveness, and Accuracy.
What is electrical calibration?
Electrical Calibration is the process of verification of performance or adjusting any kind of instrument that tests or measures electrical parameters. Electrical Calibration Proves The Electronic Of Electrical Instruments (Such As Multimeter, Insulation Tester, Earth Ground Tester, Process Calibrator, Cable Fault Locator And Many More) Are Performing Within The Accuracy Range As Per Manufacturer’s Standards. The Proper Calibration Plays a Vital Role Not Only for Ensuring Electrical Instruments Quality But Also for Proving best Operational condition of the Measuring Instruments. However, It Is Essential For Your Equipment as well as for the Process that needs to Meet the Regional And International Standards like ISO/IEC 17025, ISO 9001.
Want To Take A Short Virtual Tour of Our Electrical Calibration Lab
Calibrators and standards traceability:
As Per VIM, Metrological Traceability is the proof of a measurement result where the result can be related to a reference calibration evidenced to an unbroken chain of calibrations, each contributing to the result of measurement uncertainty.
To Maintain traceability the calibration should be linked all the way to the International Standards Or SI through a documented unbroken chain of calibration.
A Secondary Standard usually knows as Master Calibrator Used By Accredited User Laboratory that can produce or measure a wide range of precise digital output signals such as voltage ac/dc, current ac/dc, resistance, capacitance, frequency, and many more. These Output Signals are Calibrated by a Primary Standard to maintain the calibration traceability. The Master Calibrators' accuracy and performance are three or four times better than industrial standards.
Primary Standards usually used by National Metrology Institute (NMI) are more precise instruments than a calibrator. Its Measurement Accuracy is four or five times better in accuracy and performance. But the functionality is limited compared to the calibrators. Often a Primary standard can provide only one or two electrical outputs with a limited operating range.
The Industrial Standards are usually used in Customer End for Measuring the Field Instruments. The Measurement Accuracy And Performance are very low compared to the calibrators. These instruments should be calibrated or verified by doing calibration by a user-accredited laboratory with a minimum time interval. These instruments are calibrated with reference to Secondary or Primary Calibration Standards used by the Calibration Laboratory. Thus, Traceability Ensures the proper calibration result chain through the measurement uncertainty result declared by a laboratory in all levels of calibration.
Our accreditation and certification:
PICO LABS LIMITED, A NABL ISO/IEC 17025:2017 Certified Calibration Service Provider We Ensure The Proper Calibration And Verification Services For Your Electrical Test and Measurement Equipment That Meets All The Relevant Regulation And International Standard As Per ISO/IEC 17025:2017. PICO As Your Calibration Service Partner, We Will Provide a Calibration Certificate Complying ISO/IEC17025:2017 Which is the Highest Standard for Calibration Service With an Interval of Calibration Period of 12 Months.
Our automated calibration system:
Our Automated Calibration Management Software MET/CAL From FLUKE, USA Meet All The Regulatory Requirements Of International Quality Standards Like ISO 9000, ISO/IEC 17025, NRC 10 CFR, ANSI Z540.3, And Others, Ensures Our Proper Automated Calibration Procedure To Perform Controlled And Consistent Test Of Your Electrical Pieces Of Equipment. The MET/CAL, Automated Calibration Management Software Servers Wide Range of Automated Calibration in Electrical And RF Test And Measurement Instruments.
Our Well Trained Specialities And State Of Art Calibration Equipment’s From FLUKE Serves a Wide Range Of Manufactures for Calibrating Instruments. Our Automated Calibration Management Software MET/CAL Ensures The Best Calibration Procedure For Calibrating Electrical Instruments, In Terms Of Fast Delivery Time, Automated Calibration System, No Manipulation, Software Generated Calibration Certificate, Transparent Calibration Service in Bangladesh.
PICO ELECTRICAL CALIBRATION CAPABILITIES: (A Downloadable PDF)
List of instruments that needs calibrations:
We Serve Comprehensive and Cost-Effective Calibration Services for a Wide Range Of Electrical measuring test instruments:
- Digital Meter’s Up to 6 ½ Digits (Hand-held and Benched Top)
- Multimeter’s (Digital & Analog)
- Clamp-On Meter (Up to 1000 Amper)
- Tong Tester
- Tong Meter
- Panel Meter
- Energy Meter
- High Resistance Meter
- Megaohm Meter
- Lux Meter
- Graphical Multimeters
- Data Loggers
- Strip And Chart Recorders
- Decade Resistance Boxes
- Documenting Process Calibrator
- Frequency Counter
- Contact Resistance Meter
- Earth Ground Tester
- Insulation Tester
- Signal/Function Generator
- Hipot Tester
- High Voltage Test Verification
- Cable Fault Locator
- Loop/Line Impedance Tester
- Universal Relay Test Set CMC 356
- Universal Primary Injection Tester - CPC 100
- Power Harmonics Analyzer
- Power Quality Analyzer
- Power Supply
- Tachometer Calibration
- Continuity Testers
- Leakage Current Testers
- Circuit Breaker Testers (RCD/GFCI)
- Multifunction Installation Testers
- Portable Appliance Testers (PATs)
- HART Communicator
Our Specialized Calibration Team Trained From FLUKE, BSTI, And Other Renounced Organization And Have Years Of Experience Over Various Test And Measuring Instruments for Qualified Calibration Work Which Helps To Gain The Customer Confidence, Calibration Consistency, And Quality Service.
The Electrical Calibration laboratory is one of the most Vital laboratories that help the industries by providing electrical calibration services for almost all, electrical, electronic, a test measuring instruments like Digital Multimers, Process Panel meters, Oscilloscope, Breakdown Tester, LCR meters, Power and Energy meters, Micro Ohmmeters, Function generators, Signal generators, Relay Timers, etc.
We use world-renowned Instruments to ensure the highest degrees of measurement confidence. The Electro-Technical Calibration standards maintained by STRC are regularly upgraded and are traceable to the national and international standards through the high precision electrical calibration services laboratories.