Receive in amaizing time
Return policy that lets you shop at ease
We only sell 100% authentic products
Your data is always protected
Fluke 113 Digital Multimeter gives users the means to speedily and easily con basic meter set and reconnects investigation. This meter is easy-to-use and has the features needed to pin most electrical problems.
The Fluke 113 has significant improvements gone again other digital multimeters available in this area the pronounce, including Fluke model 7-600. Using the Fluke VCHEK LoZ low impedance measurement row out, users can simultaneously test for voltage or continuity. LoZ low impedance measurements in addition to block ghost voltages induced by approachable conductors.
Be advised that LoZ low impedance measurements aptitude a low load to a circuit protected by an RCD, which can cause the RCD to vacation. The Min/Max produce an effect lets you baby book signal fluctuations.
The Fluke 113 can be in role diode tests and provides both auto and calendar ranging capabilities. With features such as conformance to the latest safety standards, backlight, and a much larger display that's easier to view, this meter is a must-have for all toolbox.
When you want to find out the best & reliable authorized Fluke distributor in Bangladesh. No need to be panic, we are here for you. We provide world Famous Fluke digital multimeter a reasonable price. Keep it simple and gets the best Digital Multimeter that you are looking for.
|VCHEK1 2 3||Range||6.000 V / 60.00 V / 600.0 V|
|Resolution||0.001 V / 0.01 V/ 0.1 V|
|Accuracy||DC, 45 to 500 Hz: 2.0% + 3
500 Hz to 1 kHz: 4.0% + 3
|Diode test4||Range||2.000 V|
|Accuracy||2.0% + 3|
|Continuity4||Accuracy||Beeper on < 20 Ω, off > 250 Ω detects opens or shorts of 500 μs or longer|
|Ω4||Range||600.0 Ω / 6.000 kΩ / 60.00 kΩ|
|Resolution||0.1 Ω / 0.001 kΩ / 0.01 kΩ|
|Accuracy||0.9% + 2 / 0.9% + 1 / 0.9% + 1|
|Capacitance4||Range||1000 nF / 10.00 μF / 100.0 μF / 9999 μF|
|Resolution||1 nF / 0.01 μF / 0.1 μF / 1 μF|
|Accuracy||1.9% + 2
100 μF - 1000 μF: 1.9% + 2
1000 μF: 5% + 20
|1. All VChek voltage ranges are specified from 60 counts to 100% of range. Because inputs below 60 counts are not specified, it is possible and normal for this and other true-rms meters to display non-zero readings when the test leads are disconnected from a circuit or are shorted together.
2. Crest factor of ≤ 3 at 4000 counts, decreasing linearly to 1.5 at full scale.
3. Minimum measureable input in VCHEK autorange is 3 VDC. For measurements below 3 VDC, push Range button twice to get to 6 VDC manual range.
4. After measuring voltage, a wait time of 1 minute is required to maintain accuracy of ohms, capacitance, diode test, and continuity.
|Maximum voltage between any terminal and earth ground||600 V|
|Display||3 3/4-digits, 6000 counts, updates 4/sec|
|Operating temperature||-10°C to 50°C (14°F to 122°F)|
|Storage temperature||-40°C to 60°C (-22°F to 140°F)|
|Temperature coefficient||0.1 x (specified accuracy) / °C (< 18°C or > 28°C)|
|Operating altitude||2,000 m|
|Storage altitude||10,000 m|
|Relative humidity||95% to 30°C
75% to 40°C
45% to 50°C
|Battery type||9 Volt Alkaline, ANSI 1604A / IEC 6F22|
|Battery life||Alkaline: 300 hours typical, without backlight|
|Shock||1 Meter drop per IEC 61010–1–2001|
|Vibration||Per MIL-PRF-28800 for Class 2 instrument|
|Size (H x W x L)||167.1 x 85.1 x 46.0 mm (6.58 x 3.35 x 1.81 in)|
|Weight||13.0 oz (404 g)|
|Safety||Complies with ANSI / ISA 82.02.01 (61010–1) 2004, CAN / CSA-C22.2 No 61010-1-04, UL 61010–1 (2004) and IEC / EN 61010–1 2nd Edition for measurement Category IV, 600 V, Pollution Degree 2, EMC EN61326–1|
|EMI regulations||Complies with FCC Part 15, Class B|
|VCHEK||Input impedance (nominal)||~3 kΩ < 300 pF|
|VCHEK||Common mode rejection ratio
(1 kΩ unbalanced)
|> 60 dB at DC, 50 or 60 Hz|
|Ω||Open circuit test voltage||< 2.7 VDC|
|Full scale voltage||< 0.7 VDC|
|Diode test||Open circuit test voltage||2.7 VDC|
|Full scale voltage||2.000 VDC|
|Ω||Short circuit current||< 350 μA|
|Diode test||Short circuit current||< 1.0 mA|